Simulation thatch roof installation methods are as follows:
Simulation thatch roof installation methods are as follows:
1, simulation thatch pre-construction preparations
Laying only need a knife, brown brush, glue bucket.
Simulation of thatch into the construction site, and in accordance with the distinction between places will be curled with simulation of thatch spread flat on the designated places, spread out the simulation of thatch shaking, so that it restores the natural fluffy state.
Simulation thatch paving direction common, to ensure that the grass inverted to the same direction.
2, roof landscaping simulation thatch construction measurement and release line
The use of accurate measuring things, such as latitude and longitude measuring things, standard straightedge and other things, according to the place design drawings in the place on the place of symbols out of the place of each side line and line orientation, around the drip edge of the reserved 10 centimeters or so.
3, simulation thatch trimming is completed, glue. Gluing before to ensure that the lawn is dry, artificial turf dry degree of compliance with the coating, coating speed should be uniform, can not be repeated coating, coating order should be common, to avoid the phenomenon of high and low!
Simulation thatch cutting, splicing. Cutting: cutting size should be common, and will cut the simulation thatch for splicing, splicing seam should be less than 2mm.
4) simulation thatch splicing bonding. Simulation thatch splicing for bonding, thatch splicing between the use of adhesive tape bonding.
5) Simulation thatch compaction. Use a rubber hammer to compact the seams, to ensure that the seams are flat, strong and tight!
